1. put off all cabinet doorways


the first step you need to do is to get rid of all cabinet doorways. it will likely be a lot harder to put together and paint them with the doorways nonetheless attached. remove the handles of knobs as well. gather all of the screws and set them apart so that you might not have problems when reattaching them later.


  1. smooth the cabinet components


antique shelves will most probably have a buildup of dust, grease, meals remnants and other residue. cleaning them very well is very critical since the paint might not adhere properly to these items. Wipe all parts with a rag dipped in an all-motive cleanser and scrape or rub stubborn, dried grease spots with a Scotchbrite pad. permit them to dry thoroughly in a while.


three. Sand the cupboard parts


After all of the parts are dry, use a a hundred and fifty-grit or finer grit sandpaper and sand all the surfaces, together with the cupboard doors and drawer containers. Sanding the surface will allow the primer stick higher, hence resulting in a more long lasting paint process best handheld sprayer .


four. observe the Primer


A primer enables the paint to stick better to the surface. If the color you would like to repaint the cabinets fits the vintage colour, this step might be skipped. serious dents can be packed with putty. however, if you want to cover up any blemishes or defects, making use of primer is crucial.


five. observe the paint


After the primer is dry, begin painting the shelves the usage of a pneumatic sprayer or a brush. A sprayer will come up with a smooth finish, however in case you do not have one at home.

this could loosen and put off the embedded dirt from the deck. After a ten to fifteen minute smash, again hose down the deck. Rinse out the pump sprayer as well. what’s left might be a dust unfastened deck.